A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Text excerpt from page 50 (click to view)
50
EN
USER MAINTENANCE
After Use
LENS COVER Open/Close Ring
1 2 3 4 5 6 1
Remove. PUSH Button EJECT Switch
Turn off the camcorder. Open the LCD monitor* fully. Slide EJECT to open the cassette holder, then remove the cassette. Press PUSH to close and lock the cassette holder. Close and lock the LCD monitor*. Slide BATTERY RELEASE to remove the battery pack. Turn the LENS COVER Open/Close Ring to close the lens cover.
BATTERY RELEASE Set to �OFF�.
Cleaning The Camcorder
To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. Open the LCD monitor* and wipe gently with a soft cloth. Be careful not to damage the monitor*. Close the LCD monitor*. To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper. To detach the eyepiece, turn it counterclockwise and pull it out. Remove dust from the viewfinder using a blower brush. Re-attach the eyepiece and turn it clockwise.
2 3 4 5 6
Remove. PUSH Button EJECT Switch
*GR-SXM320 only. NOTES: � Avoid using strong cleaning agents such as benzine or alcohol. � Cleaning should be done only after the battery pack has been removed or other power units have been disconnected. � Mold may form if the lens is left dirty. � When using a cleaner or chemically treated cloth refer to the cautions of each product. � When removing the eyepiece, be sure to hold the viewfinder securely.
