My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
Text excerpt from page 8 (click to view)
Condenser Coil
Clean condenser coil every three months. Dust and lint will cause the following: � reduced cooling performance � increased energy usage � premature failure of electrical parts 1. 2. 8. Grasp ends of toe grille and lift up. Pull forward to remove. Clean coil with a vacuum cleaner hose nozzle. Replace toe grille by positioning top and snapping in bottom. Toe grille can only be installed one way. Rotate stabilizing leg counterclockwise until leg is off floor. Pull refrigerator away from wall and run a vacuum brush across condenser fan outlet grille on lower back of refrigerator.
4.
Light Bulb
WARNING
To avoid electrical shock which can cause severe personal injury or death, unplug power cord or open household circuit breaker to refrigerator before replacing light bulb. After replacing light bulb, reconnect power. Replace bulb with a 40 watt or lower appliance bulb. Examples are as follows: Amana #A0282803 GE or Westinghouse #40A15/1 Sylvania #40A15 Important If hot, allow bulb to cool and wear gloves to protect hands should bulb break. 1. Remove light bulb cover by unscrewing fastener at back center of light cover. Pull light cover straight down. There are small supports on each side to hold cover in place. Replace light bulb. Reinstall light bulb cover by reversing above procedure.
