|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Il service manual molto accurato. Rapidi nella risposta
;
Quick site processing. A complete and very useful manual with all details. Thank you!
;
Quick service response. A useful and very rare service manual with all details. I recomend this service.
;
I ordered this manual sometime in the afternoon and I received it on my e-mail the same evening.
This is a fantastically good and properly scanned copy of the original manual. All pages are of the same scale and they overlap each other. It means that you can print the manual and easily make it as a convenient paper manual.
The content of the manual is fantastic. Alignment descriptions, PCB layouts and elementary diagrams are explicit and precise. I immediately found what I was looking for. Thanks to this manual and Owner-Manuals.com my amplifier is alive again. Many thanx indded!
;
The manual was well-scanned and easy to read. As an added bonus, the Operator's Manual was bundled with the Service Manual!
I'd definitely use owner-manuals.com again.
HCD-CP101 SECTION 4 TEST MODE
[COLD RESET] � The cold reset clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning the set to the customer. Procedure: 1. Turn ON the power. 2. Press three buttons of x (TAPE), x (CD), and [BAND] simultaneously. 3. The set is reset. [LIQUID CRYSTAL DISPLAY ALL LIT CHECK MODE] Aging mode sequence: Procedure: 1. Set to standby state. 2. Press three buttons of x (TAPE), x (CD), and [TUNING MODE] simultaneously. 3. Liquid crystal display are all turned on. 4. To exit from this mode, press the I/1 button to turn the power OFF. [TAPE DECK AGING MODE] This mode can be used for operation check of tape deck section. Procedure: 1. Set a tape in the tape deck. 2. Set to standby state. 3. Press three buttons of x (TAPE), x (CD), and [TUNING +] simultaneously. 4. The aging is executed in bellow sequence. 5. To exit from the aging mode, press the I/1 button to turn the power OFF. Aging mode sequence:
Start
[CD AGING MODE] This mode can be used for operation check of CD section. Procedure: 1. Load a CD disc. 2. Set to standby state. 3. Press three buttons of x (TAPE), x (CD), and [TUNING --] simultaneously. 4. The aging is executed in bellow sequence. 5. To exit from the aging mode, press the I/1 button to turn the power OFF.
Open the disc tray
Close the disc tray
Play the last track
Start
[CHANGE-OVER MD/VIDEO] Procedure: 1. Set to standby state. 2. Press the x (CD) and the [FUNCTION] buttons simultaneously. The function changes over to MD or VIDEO by turns. [CHANGE-OVER THE AM TUNING INTERVAL] (EXCEPT AEP and UK models) � The AM tuning interval can be changed over 9 kHz or 10 kHz. Procedure: 1. Press the I/1 button to turn the power ON. 2. Select the function �TUNER�, and press the [BAND] button to select the BAND �AM�. 3. Press the I/1 button to turn the power OFF. 4. Change over to 9 kHz: Press the [TUNING --] and the x (CD) buttons simultaneously. Change over to 10 kHz: Press the [TUNING +] and the x (CD) buttons simultaneously.
FWD Play 1 minute REC pause for 3 seconds
Shut off
FWD REC 3 minutes Fast forward
Shut off
REV Play 1 minute REC pause for 3 seconds
Shut off
REV REC 3 minutes Rewind
Shut off
12
|
|
|
> |
|
