First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
Welcome. The scheme is clearly helped me to repair. Worth to download it.
Text excerpt from page 5 (click to view)
HCD-DX90
This section is extracted from instruction manual.
Step 2: Setting the time
You must set the time before using the timer functions. The clock is on a 24-hour system for the European model and a 12-hour system for other models. The 24-hour system model is used for illustration purposes.
3
Press ENTER.
The minute indication flashes.
4
Press . or > repeatedly to set the minute. Press ENTER.
The clock starts working.
1
� P p
5
Tip
2,4
=
+
3,5
p
If you�ve made a mistake, start over from step 1.
0 ) ( P
To change the time
The previous explanation shows you how to set the time while the power is off. To change the time while the power is on, do the following: 1 Press CLOCK/TIMER SET. 2 Press . or > repeatedly to select SET CLOCK. 3 Press ENTER. 4 Perform steps 2 through 5 above.
Note
1
Press CLOCK/TIMER SET.
The hour indication flashes.
The clock settings are canceled when you disconnect the power cord or if a power failure occurs.
