Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Excellent quality, very quick download turnaround, will definately use again.
Text excerpt from page 23 (click to view)
HCD-FC7 SECTION 4 ASSEMBLY
� This set can be assembled in the order shown below.
4-1. HOW TO INSTALL THE CAM (EJECT LOCK)
1 Rotate the cam (BU U/D) fully in the direction of arrow. 2 Engage the gear (eject lock) and the gear of the cam (eject lock) aligning the mark with the center of the gear (eject lock).
cam (BU U/D)
mark
gear (eject lock)
cam (eject lock)
� bottom view � front �
4-2. HOW TO INSTALL THE CAM (GEAR)
1 Check that the cam (BU U/D) can not be rotated in the direction of arrow. 2 Align the mark on the cam (gear) with the boss as shown in the figure and install the cam (gear).