|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Service manual very complete and clear. It was very helpfull for my work.
;
This is the 2nd time I download manuals from this website and I can say it's what I was expecting. It contains schematic, layout (decent quality), short description, parts and dissasembly instructions. I recomend it for anyone who wants to repair/modify this device.
;
Very useful Service Manual! With it I was able to identify the damaged pots in my old amplifier, purchase the adequate replacements and make myself the repair.
I have again my old amplifier, still a very good one that I will keep for as many years as I can!
Thanks to Owner Manuals!
;
Good price for the manual and easy to locate on the site and download. Plus, just like the original. Thanks a lot.
;
Genuine Service Manual. Link was available in less then an hour or so. Service Manual contains assembly, PCB layout, complete circuit diagram, Components list etc
HCD-HPR90/HPR99XM
CD SERVICE MODE
This mode can run the CD sled motor freely. Use this mode, for instance, when cleaning the optical pick-up. Procedure: 1. Press the I/1 button to turn the power on. 2. Press the [CD] or [FUNCTION] key on the remote commander to select �CD�. 3. Press three buttons of [PUSH ENTER], [DSGX] and [DISC 1] simultaneously, the message �SERVICE IN� is displayed on the fluorescent indicator tube. 4. Press the M L button to move the optical pick-up to outside track and the message �SLED OUT� is displayed on the fluorescent indicator tube, or press the l m button to inside track and the message �SLED IN� is displayed on the fluorescent indicator tube. 5. Press the x button, �LD OFF� is displayed and laser diode is turned off. Each time x button is pressed, laser diode ON/ OFF switch is performed. 6. To release this mode, press the I/1 button.
TUNER STEP CHANGE-OVER
A step of AM tuning interval can be changed over between 9 kHz or 10 kHz. Procedure: 1. Press the I/1 button to turn the power on. 2. Press the [TUNER/BAND] button to select �AM�. 3. Press the I/1 button again to turn the power off. 4. Press two buttons of M L and I/1 simultaneously. 5. The message �STEP 9kHz� or �STEP 10kHz� is displayed on the fluorescent indicator tube and thus the tuning interval is changed over.
13
|
|
|
> |
|