Thank you very much for this Service Manual, it helped us a lot to repair the M-4318!
...BUT: The parts list is missing and the free parts katalog on web isn't complete, so now we don't know the part numbers of the defect parts :(
We had to build them out of a working machine, and need the numbers to reorder the missing parts now.
Very good manual. Plenty of service information including alignment instructions. Clear circuit diagram. Excellent, thank you.
Text excerpt from page 52 (click to view)
HCD-HPX10W
4-13. CONFIRMING THE ASSEMBLING OF THE ARM SECTION
2 Check point 1: The smooth movement of this part when sliding. UPPER SIDE 6 Check point 3: Two parts of the stopper touch the stock base (B).
Note. If the two parts of the stopper do not touch the stock base (B) when the sub slider assy is pushed to the end, the phases are not correctly adjusted. Reassemble the assy.
5 Push the sub slider assy into the end of the arm (R).
1 Release the lock of the sub slider assy and slide it in the direction of the arrow.
stock base (B)
3 Check point 2: All the stocker assy is standing.
4 Slide the stocker assy in the direction of the arrow.
