|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
About this service manual
For the promotion of browse in the PDF format, the �TABLE OF CONTENTS� was eliminated. As an alternative means, use a conventional function, "Bookmark". It will help you search/display not all pages but the desired page. In addition, the page layout was changed so that each page is positioned in the center to improve the visibility on the screen. In the circuit diagram section, the symbols (such as @001) indicating internal connections of the divided circuit diagrams were eliminated. As an alternative function, the "Signal Location" is added. Except "GND", the divided signal names are listed in alphabetical order for easy search of the divided circuit diagrams (division numbers) and addresses. Example:
Address Division number Signal name
Of course, you can find the desired location by entering the signal name using the search function of the Acrobat, but it will take time to locate the one you want because the same words exist to and fro in the service manual. In the PWB drawing section, the �MOUNTED PARTS LOCATION� was eliminated. To check the mounted part location, look at the enlarged view of the printed wiring board on which the desired part is mounted and enter the reference number for search with the Acrobat search function. If the corresponding part is found, it is highlighted and displayed in the center of the screen.
|
|
|
> |
|
