SONY HKDV-502
Owner's Manual

Adjusting the R�Y output level (D1)
Make this adjustment with the ALT/[F4] (R�Y LEVEL) buttons. prst: 100% (4000H) Numerical value: 0.0 to 141.3% Adjustable range: �� to +3 dB

Adjusting the sync phase (D1/D2)
Use this setting to precisely match the output phase of the VTR to the reference signal or when using a switcher or other device connected to another VTR to create special effects such as fading, wrapping, and dissolving. To adjust the output signal sync phase with respect to the reference input, make this adjustment with the ALT/[F9] (SYNC PHASE) buttons. prst: 0 (0) Numerical value: �128 to +127 Adjustable range: �0.5 to +0.5H

Adjusting the video output level (D2)
Make this adjustment with the ALT/[F5] (VIDEO LEVEL) buttons. prst: 100% (4000H) Numerical value: 0.0 to 141.3% Adjustable range: �� to +3 dB

Fine adjustment of the sync phase (D1/D2)
Make this adjustment with the ALT/[F10] (FINE) buttons. prst: 0 (0) Numerical value: 0 to 1024 Adjustable range: 0 to 296 nsec

Chapter 4 Menu Settings

Adjusting the chroma output level (D2)
Make this adjustment with the ALT/[F6] (CHROMA GAIN) buttons. prst: 100% (4000H) Numerical value: 0.0 to 141.3% Adjustable range: �� to +3 dB

Adjusting the hue (D2)
Make this adjustment with the ALT/[F7] (HUE) buttons. prst: 0° (0) Numerical value: �30 to +30 Adjustable range: �30° to +30°

Adjusting the setup level (D2)
Make this adjustment with the ALT/[F8] (SETUP LEVEL) buttons. prst: 7.5 IRE (7.5) Numerical value: 0 to +10.0 Adjustable range: 0 to +10.0 IRE

Chapter 4

Menu Settings

4-41