Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 13 (click to view)
Front Panel LED Indicators
The three lights on the front panel indicate the status of your TV.
POWER Press to turn the TV on and off. Remote Control Sensor Aim the remote control towards this spot on the TV.
: Light is On : Light is Blinking : Light is Off TIMER LAMP STAND BY/TEMP Standby state. The picture will automatically appear in about 15 seconds. Auto Timer ON/OFF has been set and the unit will automatically be turned on in about 25 seconds. A cooling fan inside the set is not operating normally. Lamp cover on rear of the set is not properly shut. Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off. Lamp may be defective. Please contact a certified technician. � It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. � The TV has a fan to keep the inside lamp from overheating. You�ll occasionally hear it working. Indication
