Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Great to be able to set channels again, on an old but stoll fine working TV
Text excerpt from page 23 (click to view)
SIMPLE PLAYBACK AND RECORDING
EN
23
Simple Playback
Turn on the TV and select the VCR channel 3 or 4 (or AV mode).
STOP PLAY
1
LOAD A CASSETTE
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR. Don�t apply too much pressure when inserting.
� The VCR�s power comes on automatically. � The counter is automatically reset to "0H 00M 00S". � If the cassette's record safety tab has been removed, playback begins automatically.
2
TIME SCAN SHUTTLE PLAY
q
If the tape is advanced past the start point, press REW or turn the TIME SCAN SHUTTLE ring to the left. To go forward, press FF or turn the TIME SCAN SHUTTLE ring to the right.
FIND PROGRAM START POINT
START PLAYBACK
3
STOP/EJECT
Press PLAY. "AUTO PICTURE" appears on screen ( pg. 35).
STOP PLAYBACK
4
Press STOP or STOP/EJECT. Then press STOP/EJECT to remove the cassette.
Usable cassettes
Full-Size VHS T-30 (ST-30**) T-60 (ST-60**) T-90 T-120 (ST-120**) T-160 (ST-160**) ST-210** Compact VHS* TC-20 (ST-C20**) TC-30 (ST-C30**) TC-40 (ST-C40**) * Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette. ** This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS signals only. It is not possible to play back Super VHS recordings.
