This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Fast and courteous service. Product delivered as described. Thank you.
Text excerpt from page 25 (click to view)
25
Recording Features
Record One Program While Watching Another
During recording... � If using the RF connection ( pg. 4), press TV/VCR. The VCR's VCR indicator goes out and the TV broadcast being recorded disappears. � If using the AV connection ( pg. 4), change the TV's input mode from AV to TV.
ENGAGE TV MODE
1
� £
q
2
5/8
3
SELECT CHANNEL FOR VIEWING
2
Use the TV�s channel selector to set the channel you want to watch.
Display Elapsed Recording Time
1 4 7 2 5 8 0
3
RESET COUNTER TO ZERO
1
TV/VCR
Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.
6 9
DISPLAY ELAPSED TIME ON SCREEN
2
3 7 8 ¢
��¡
OSD C.RESET
1�� ¶ 4
During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display. � Make sure "SUPERIMPOSE" is set to "ON" ( � The indications are not be recorded. pg. 17).
