perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 23 (click to view)
EN
23
Recording Features
V / C R
q
Record One Programme While Watching Another
If your recorder is connected to the TV via AV connection, . . . . . . press TV/VCR. The recorder's VCR indicator and the TV broadcast being recorded disappear.
SELECT CHANNEL TO WATCH
1
Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.
� The programme selected with the TV�s channel controls appears on the TV screen while the one selected with the recorder's TV PROG. buttons is recorded on the tape. � If a decoder is connected to the recorder ( pg. 35), you can select a scrambled channel as well with the TV channel controls.
TV PROG. COUNTER RESET
Elapsed Recording Time Indication
You can check the exact time of a recording.
DISPLAY
2
SET COUNTER DISPLAY
1 4 7
2 5 8 0
3 6 9
4
1 2
TV PROG.
Press DISPLAY until a counter reading appears on the dispay panel.
RESET COUNTER
Press C.(COUNTER) RESET before starting recording or playback. � The counter is reset to �0:00:00� and shows the exact elapsed time as the tape runs.
C.RESET
T V
3
Tape Remaining Time
DISPLAY REMAINING TIME
1
1
Press DISPLAY until the time remaining on the tape appears. � By pressing the DISPLAY button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.
* channel position is not displayed during playback.
NOTE:
Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "- - : - -" may sometimes appear, or the display may blink on occasion.
