The users guide was excellent. It provided the information neeeded to connect and control the Crate system. Nothing was left to chance
Text excerpt from page 58 (click to view)
English: HS3 User�s Guide, Chapter 6
USER�S GUIDE
3. Hold the side of the ink holder and place the ink holder onto the top of the ink reservoir. Be sure to add the correct color ink cartridge to the correct reservoir. The ink holders are keyed to prevent incorrect insertion of the ink holder. Do not force the ink holder into the top of the ink reservoir.
Fig. 6-13 Using the ink holder
Note Add ink to the printer by using the ink holder. Do not remove ink blocks from the holder. 4. Push the center of the ink holder. The ink blocks are dropped into the ink reservoir.
Fig. 6-14 Adding the ink blocks
Note When you want to add two or more holders of ink, close the ink reservoir cover after adding each holder of ink (3 blocks). Closing the cover pushes the added ink blocks down, so that you can add the next holder full of ink blocks. Open the cover each time you add the next holder of ink blocks. Then close the reservoir. 5. Close the ink reservoir cover.
