PIONEER HTP-33
Owner's Manual

09

Additional information

Chapter 9

Additional information
Setting the sleep timer
The sleep timer switches off the receiver subwoofer after a specified time so you can fall asleep without worrying about it.1

DTS CD setting
If you play a DTS-encoded CD, you will need to change this setting to hear the decoded signal.

1 2

Switch the system into standby. Press SETUP.

DVD

DTV

PC/GAME

AUX

TUNER

3 Use the / (cursor left/right) buttons to select CD TYPE from the menu, then press ENTER. 4 Use the / (cursor up/down) buttons to select a setting, then press ENTER.
Select from: � NORMAL � Use for playback of regular audio CDs. Some DTS-encoded CDs will output noise when played. � DTS-CD � Use for playback of DTS-encoded CDs, but note that the beginning of regular CD tracks may be skipped.

SLEEP

ENTER
SETUP

CLEAR
SR

TUNE ST ST

ENTER

1 Press the SLEEP button to select an option. Choose between the following options:
� SLP ON � Switches off after about an hour � SLP OFF � Cancels the sleep timer After selecting SLP ON, you can press SLEEP again to check how much time is left. Each line indicates approximately 12 minutes (remaining):

Resetting the system
Use this procedure to reset all system settings to the factory default.

SLP - - - - Dimming the display

1

Switch the system on.

2 Press and hold SURROUND then press the STANDBY/ON button on the display unit. The next time you switch on, all the system settings should be reset.
SLEEP

ENTER
SETUP

CLEAR
SR

TUNE ST ST

ENTER
SOUND TEST TONE

TUNE

SOUND RETRIEVER

SURROUND

ADVANCED

MCACC

You can choose to dim the display if you find it too bright.2

1

Press SETUP.

2 Use the / (cursor left/right) buttons to select DIMMER then press ENTER. 3 Use the / (cursor up/down) buttons to select LIGHT or DARK then press ENTER.
Note
1 The display dims when the sleep timer is set. 2 The display dims when the sleep timer is set, regardless of this setting.

30
En