The users guide was excellent. It provided the information neeeded to connect and control the Crate system. Nothing was left to chance
Text excerpt from page 23 (click to view)
Preparing the Camera
21
Installing the Battery Pack
Install Battery Pack NB-1LH (supplied) as shown below. Battery Pack NB-1L (optional) can also be used with the camera.
� Please recharge the battery pack (p. 19) before you use it for the first time.
2 1
� Slide the battery cover in the direction of the arrows.
Battery Lock
1 2
� Press the battery lock while inserting the battery pack all the way in until the lock clicks. � Insert the battery pack correctly by aligning the arrows on the camera and the battery pack. � To remove the battery pack, press the battery lock and pull the battery pack out. � Slide the battery cover closed.
� Do not turn off the power or open the battery cover while the camera�s indicator flashes green. The camera is writing, reading, erasing or transmitting an image to or from the CF card. � Remove the battery pack when the camera is not in use. Please note, however, that the date, time and other camera settings may reset to the default settings if the battery pack has been removed for more than three weeks.
