KENWOOD KDC-5026
Owner's Manual

Canceling Direct Access Tuning Press the [DIRECT] button on the remote.

Frequency Step Setting
Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. While pressing the [1] and [5] button, press the Reset button. The frequency step changes to FM band 200 kHz, and AM band 10 kHz.
� When the same operation is repeated, it returns to the original setting. � When the frequency step is switched, the frequencies in the memory are deleted.

Station Preset Memory
Putting the station in the memory.

1 Select the band
Press the [FM] or [AM] button.

2 Select the frequency to put in the memory
Press the [4] or [¢] button.

3 Put the frequency in the memory
Press the desired [1] � [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] � [6] button.

Auto Memory Entry
Putting stations with good reception in the memory automatically.

1 Select the band for Auto Memory Entry
Press the [FM] or [AM] button.

2 Open Auto Memory Entry
Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes.

Preset Tuning
Calling up the stations in the memory.

1 Select the band
Press the [FM] or [AM] button.

2 Call up the station
Press the desired [1] � [6] button.

English |

13