|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
;
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
;
complete part-lists and pcb layout, schematic diagram is good enlargable,
;
Excellent, fast delivery, excellent product. Good luck!
;
This manual is for the usa model only. But it is clear
, accurate and comprehensive, including board layouts and schematics.
I found it extremely useful for my mitsubishi dp-86da, but the same diagram would also work for the realistic lab5000 and hi fi 80. Thanks.
3.2
Troubleshooting
Feed section
Is the voltage output at IC621 pin "40" 5V or 0V? YES Is 4V present at both sides of the feed motor? YES Check the feed motor. NO Is 6V or 2V present at IC681 "16" and "17"? NO Check IC681. NO Is the wiring for IC621 pin "40"? NO YES Is 3.3V present at IC681 pin "6"? YES Check the vicinity of IC621. YES Check the feed motor connection wiring. Check CD 8V and 5V. NO
Focus section
When the lens is moving: 4V
Does the S-search waveform appear at IC681 pins "13" and "14"?
NO
Check the circuits in the vicinity of IC681 pins "13","14"and"1". YES
YES
Check the pickup and its connections
Spindle section
Is the disk rotated? YES Does the RF signal appear at IC601 pin "19"? YES Is the RF waveform at IC601 pin "19" distorted? YES Proceed to the Tracking section NO Is 4V present at IC681 pins "15" and "16"? YES Check the spindle motor and its wiring NO Check the circuits in the NO vicinity of IC601 pin "19" or the pickup NO Is 4V present at IC621 pins "41" ? YES Check the vicinity of IC681. NO
Check the circuits in the vicinity of IC621 or IC621
Tracking section
When the disc is rotated at first:
YES
Approx. 1.2V Is the tracking error signal output at IC601 "11"?
Check the circuit in the vicinity of IC601 pins "2" to "7".
YES
Check the pickup and its connections
YES Check IC621.
(No.49839)1-25
|
|
|
> |
|