|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great Manual. This manual is available no where else. It was exactly what I was looking for.
;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
KD-LX300/KD-LX100
Extension cord connecting method
Using the extention cords to connect the front panel with the main board
Remove the main board follwing the disassembly methode. Then reattachi the heat sink to main board. 1. Using the 2pin extention cord (EXTLX001-2p), connect the harness of the feed motor (L) assembly with the connector CN503 on the main board. 2. Using the 2pin extention cord (EXTLX001-2p), connect the harness of the feed motor (R) assembly with the connector CN504 on the main board. 3. Using the jig board (EXTLX002-SWPWB), its installing to the chassis, then using 4pin extention cord (EXTLX002-4P) connect the harness of the lifter detecting board with the connector CN704 on the board. 4. Connect the connector (EXTLX001-6PC) and extension wire (EXTLX001-6PF), connect the 6pin connector CN702 on the main board. 5. Connect the connector (EXTLX002-16PC) and extension wire (EXTLX002-16PF), connect the 16pin connector CN701 on the main board.
EXTLX002-SWPWB EXTGS004-26P EXTLX002-4P EXTLX002-16PC EXTLX001-2P
EXTLX001-16PF EXTLX001-6PC
EXTLX001-2P EXTLX001-6PF
1-14
 $4.99 KDLX100 JVC
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…  $4.99 KD-LX100 JVC
Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|
|
|
> |
|
