JVC KD-S743R
Owner's Manual

Indication

For:

Preset values BAS 00 +02 +01 TRE 00 00 �03 LOUD OFF ON OFF

3

SCM OFF (Flat sound) BEAT SOFT Rock or disco music Quiet background music Light music

Adjust the bass or treble, or turn the loudness function on/off (LOUD ON/ LOUD OFF).

POP

+04

+01

OFF

4 5

Repeat steps 2 and 3 to adjust the other items. Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
SCM

Notes: � You can adjust each sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see �Storing your own sound adjustments� below. � To adjust the bass and treble reinforcement levels or to turn on/off the loudness function, see page 20.

Your adjustment made for the selected sound mode is stored in memory.

6
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory. � There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

Repeat the same procedure to store other sound modes.

To reset each sound mode to the factory settings, repeat the same procedure and reassign the preset values listed in the table on the left column.

1

Call up the sound mode you want to adjust.
SCM

� See page 20 for details.

2

Select �BAS� (bass), �TRE� (treble), or �LOUD� (loudness).
SEL

21

ENGLISH