This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Text excerpt from page 45 (click to view)
Using and Caring for Your Oven
Using and replacing the oven light(s)
Your oven may have a standard oven light or two side halogen lights. The oven light(s) will come on when you open the oven door. To turn the light(s) on when the oven door is closed, press the Oven Light pad on the control panel. Press the pad again to turn off the light(s).
OVEN LIGHT OVEN LIGHT
Replacing oven lights (models with side halogen lights):
1. Unplug range or disconnect power. 2. Make sure the oven is cool before replacing the light bulb.
Replacing the oven light (models with light on back wall):
1. Unplug range or disconnect power. 2. Make sure the oven is cool before replacing the light bulb. 3. Remove glass light cover by grasping front edge of cover and pulling it away from the side wall of the oven. 4. Remove the light bulb from its socket. Replace the bulb with another halogen bulb (12 volt, 5 watt maximum, available at most hardware stores). 5. Replace the light cover by snapping it back into wall. 6. Plug in range or reconnect power. NOTE: The oven lights will not work during the Self-Cleaning cycle.
3. Remove the glass bulb cover in the back of the oven by turning it counterclockwise. 4. Remove the light bulb from its socket. Replace the bulb with a 40-watt appliance bulb. 5. Replace the bulb cover by turning it clockwise. 6. Plug in range or reconnect power. NOTE: The oven light will not work during the Self-Cleaning cycle.
