Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
So usefull to make my installation a breeze. 5 stars on quality.
Text excerpt from page 12 (click to view)
Using the cooktop
Turning on ^ To light a burner press down and turn the corresponding control knob counterclockwise to the largest flame symbol and release the knob. The ignitor will click and ignite the gas. The ignition process lasts approx. 8 - 10 seconds. The flame should light within 4 seconds. The Fast-IgnitionSystem will click a few seconds after the flame is lit to ensure the safety system is activated. If the burner does not light, repeat the process. If the burner does not light at the second attempt, turn the control knob to "�" and see "Frequently asked questions". ^ Now you can adjust the knob to the desired setting. Turning off ^ Turn the control knob clockwise to "�". This stops the flow of gas and turns off the cooktop.
The knob must only be turned left to turn the appliance on and right to turn it off.
If the knob is turned: - on without pressing it down first, - clockwise past the 12 o�clock position, or - counterclockwise past the smallest flame symbol, parts of the cooktop may be damaged. The manufacturer cannot be held responsible for these damages.
