The ervice manual for my 1982 Kenwood KR-1000 receiver is great! Full detail on all circuits with part number detail. I will definately be ordering more manuals for my other vintage equipment! Order was fulfilled quickly! Very efficient ordering process! Thnaks for your help! Great site!
Everything in the manual was excellent except for a couple of pictures of specific areas in the unit that were a little dark. Owners Manuals re-sent the pdf file & the problem was corrected. Excellent product! George
Text excerpt from page 6 (click to view)
KRC-108S/188
ADJUSTMENT
Set the controls and switches as follows. BALANCE : center position BASS : center position FADER : center position TREBLE : center position LOUD : OFF DOLBY NR : OFF
CASSETTE DECK SECTION
1) During FWD transport adjust (F) and (F�) so that line A of 2-LINE TAPE passes trough the center of the head shield plate (core center area) 2) During RVS transport adjust screws (R) and (R�) Head Height so that line B of 2-LINE TAPE passes trough the Screw center of the head shield plate (core center area) 3) After the alignment above, reverse the transport direction and check the FWD alignment again. If it is deviated, perform alignment again. (Tape used : SCC-1659, manufactured by A-BEX)
[1]
HEAD HEIGHT
SCC-1659
-
TAPE PLAY
[2]
HEAD TCC-153 AZIMUTH 10kHz
Connect a Head Azimuth Adjust the azimuth for each Lch/Rch or FWD/RVS AC voltmeter TAPE PLAY Screw becomes maximum to SP out.
