|
|
|
Who's Online
There currently are 5948 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
Additional TV Features
Additional TV Features
Using the Sleep Timer
The TV may be set to switch automatically to the standby mode after a length of time chosen by you. You may set the time in 15 minute steps up to 4 hours.
Using the Wake Up Timer
The TV may be set to switch on automatically after a length of time chosen by you. You may set the time in 15 minute steps up to 12 hours.
1
/
Press the MENU button on the remote control to display the menu on the TV screen.
SELECT
1
SELECT
/
OFF
Press the MENU button on the remote control to display the menu on the TV screen.
SELECT
SELECT
OFF
OK
OK
OFF
OFF
2
Press the blue button on the control to select the symbol on the TV screen, then press the yellow button.
SELECT
2
OFF
Press the blue button on the control to select the symbol on the TV screen, then press the yellow button.
SELECT
OFF
MENU
3 3
Press the yellow button repeatedly until the required amount of time delay appears on the screen.
0:45 OFF
MENU
Press the blue button on the control to select the symbol on the TV screen, then press the yellow button.
OFF OFF
PROGR
4
PROGR
Press the red or yellow button to set the time.
OFF 0:45
4
Once the time delay has been selected, press the MENU button to remove the on-screen display. One minute before standby, the display shown appears on the screen.
0:00 (OFF) 0:15 0:30 0:45 -----12:00
8
RM-883
0:59
RM-883
5
Press the standby button . The standby indicator on the TV flashes regularly to indicate that the Wake Up Timer is active. After the selected length of time, the TV switches on automatically.
/
Notes: � When watching TV, press the time remaining. button to display Notes: � If you use the �Wake Up Timer� to switch the TV on and for one hour after switching on, no TV or Remote Control button is pressed, the TV switches itself back into Standby mode and the indicator on the TV lights. � Any temporary power failure will cause a misfunction in the �Wake Up Timer� and you will have to reset the �Wake Up Timer�.
� To return to normal operation from standby mode, press the button.
/
11
12
|
|
|
> |
|
