Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
Text excerpt from page 155 (click to view)
(From Section 9.5) 2 Item (19)-a Save Setting (Select memory) Select a menu of Setting Item by pushing � (19)-b Save Setting (Memorize scanning condition to EEPROM) Set the parameter by pushing � or � � key. � � or � � key.
(19)-a
Push �
� or �
� key until
19. Save Setting xxxx
is indicated.
xxxx; � Memory 1 � or � Memory 2 � Select Memory Number (1 or 2) to store scanning condition parameters.
No
Renew the scanning Condition?
Yes Select a menu of Setting Item by pushing � � or � � key.
(19)-b
Push �
� or �
� key until is indicated.
19. Save Setting Exec =<>
Pushing �
� and �
� keys at
the same time.
Set new scan condition parameters (for Item 1 to 18 on the Scan Setting Mode) to the selected memory.
(To Section 9.5.1.1) 3
Yes
Change the parameter of another item for Scan Setting Mode? No Push key once.
