This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Fast and courteous service. Product delivered as described. Thank you.
Text excerpt from page 46 (click to view)
Restarting the KX-HGW200
The KX-HGW200 has two buttons inside the cover. These two buttons are used to initialize or restart the KX-HGW200.
To open the cover, remove the cover by sliding it up while pressing the arrow mark.
To close the cover, position the ridge on the right side of the cover into the groove on the unit and slide the cover down.
200 KX-HGW
NET INTER
ETHERN ET
CLEAR SETTING button RESET button �Press these buttons with a pencil or a similar object.
H
omePNA ELESS
WIR
POWER
To Initialize the KX-HGW200
When you do not remember the KX-HGW200 password (p. 27) or when you need to clear all the parameters of the KX-HGW200, press and hold the CLEAR SETTING button for a few seconds. The CLEAR SETTING button allows you to initialize all the parameters of the KX-HGW200 to the factory presets. Note: When you use the KX-HGW200 DHCP server function (p. 33), restart the computer(s) in the home network.
To Restart the KX-HGW200
When the KX-HGW200 POWER indicator blinks or lights red (p. 11), press the RESET button. The RESET button allows you to restart the KX-HGW200 with all the parameters preserved. Note: When you use the KX-HGW200 DHCP server function (p. 33), restart the computer(s) in the home network.
