PANASONIC KXTG1805NZ
Owner's Manual

Base Unit Settings 3 Enter �0000� (default base unit PIN).
L If you changed the PIN, enter it (page 25). L If you changed the PIN, enter it (page 25).

4 Select �Call Options�, then press 5
{>}. Select �Pause Length�, then press {>}.

4 Select �Ringer Setup�, then press
{>}.

5 Select �Night Mode�, then press {>}. 6 Select �Ring Delay�, then press {>}. 7 Select the desired setting, then press
{>}.

6 Select the desired setting, then press
{>}.

7 Press {ih}. Storing/changing emergency numbers

8 Press {ih}.

Call options
Changing the recall time
Change the recall time, if necessary, depending on the requirements of your service provider or PBX.

These settings determine which phone numbers can be dialled while the call bar feature is on (page 18).

1 Press {j/OK}. 2 Select �Base Unit Setup�, then
press {>}.

1 Press {j/OK}. 2 Select �Base Unit Setup�, then
press {>}.

3 Enter �0000� (default base unit PIN).
L If you changed the PIN, enter it (page 25).

3 Enter �0000� (default base unit PIN).
L If you changed the PIN, enter it (page 25).

4 Select �Call Options�, then press
{>}.

5 Select �Emergency No.�, then press
{>}.

4 Select �Call Options�, then press 5 Select �Recall�, then press {>}. 6 Select the desired setting, then press
{>}. {>}.

6 Select a memory location, then press

{>}. L If the memory location already contains an emergency number, the number is displayed.

7 Press {ih}. Setting pause length
Change the pause length, if necessary, depending on the requirements of your service provider or PBX.

7 Enter/edit the number, then press
{j/OK}. L To erase an emergency number, press and hold {C/T}.

8 Press {ih}.
Note: L The default setting for emergency numbers are stored in the first 3 memory locations. It is recommended that you do not overwrite these numbers.

1 Press {j/OK}. 2 Select �Base Unit Setup�, then
press {>}.

3 Enter �0000� (default base unit PIN).

23