A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
Text excerpt from page 34 (click to view)
7.Troubleshooting
The mouse cursor does not react when using the cursor control on the remote control
General: � Check that the batteries are installed properly in the remote control and/or replace the batteries. � Check that the projector receives the signals from the remote control. � Check that the USB cable or PS/2 cable has been properly connected. � Check that both projector and computer are switched on. � Unplug the USB cable or PS/2 cable and then reconnect.
<
In case of PS/2 connection: � The PS/2 mouse of the connected laptop has priority over the projector mouse loop through connection. � Disable the PS/2 mouse of the laptop by selecting �Disable in hardware profile� in the �Windows Mouse Properties� of the laptop.Then restart �Windows� on the laptop. The projector mouse loop through connection now has priority while the laptop mouse can still be used. � Switch off all devices and then reconnect while you make sure that you: � connect the PS/2 cable to PC and projector before switching on the PC; � switch on the projector before switching on the PC; � do not connect the USB cable when making the PS/2 connection. Also refer to the User Guide or support information of your computer.
�
In case of USB connection: � Connect another USB device (mouse, scanner, webcam, etc.) and see if it works. If it does not work there is a problem with the computer. � Also refer to the User Guide or support information of the computer. � �Windows� did not manage to install the driver correctly. In this case the �Device manager� will contain a catagory �Other devices. � Disconnect the projector. � Remove all items listed under �Other devices� in the �Device manager�. � Restart the computer. � Reconnect the projector. In case the computer asks for monitor drivers, install the drivers on the CD-ROM supplied with the projector. In case the computer asks for a USB-device driver, install the required drivers on the CD-ROM supplied with the computer. The size of the image exceeds 128 Kb. Reduce the size of the capture window. Select another image.
Computer asks for drivers
� �
Image for personal startup screen cannot be loaded
