I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 9 (click to view)
CaringForYourDryer
Do not run the dryer wlth the lint ecreen loose, cause overheatlng and damage to both the
Cleaning lint screen the
The lint screen is located under a lid on top of the dryer. Clean R before each load. A screen blocked by lint can increase drying time. 1. Open the lid and pull the lint screen straight out
2. Roll lint off the screen with your fingers. Do not rinse or wash the screen to remove lint. Wet lint is hard to remove. 3. Push the lint screen firmly back into place and close the lii.
Lint screenmaintenance
Laundry detergents and fabric softeners can cause a residue build-up on the lint screen. A clogged lint screen can extend drying times. Clean the lint screen every six months or more frequently if it becomes clogged due to a residue build-up. Use the folbwing method: 1. Wet both sides of lint screen wfth hot water. 2. Wet a nybn brush with hot water and liquid detergent. 3. Scrub lint screen with the brush until all residue build-up is reITlOVed.
4. Rinse with hot water. 5. Thoroughly dry lint screen with a clean towel and replace in dryer.
