This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Text excerpt from page 8 (click to view)
Mixed loads
Drying
times
When drying a load with different kinds and weights of fabrics, use the cycle suggested for the lightest fabrics. When the dryer stops, remove dry items and reset the control. To reduce wrinkling, take the load from dryer as soon as tumbling stops. This is important for permanent press, knits and synthetic fabrics.
Drying times will vary depending on: l amount of moisture in the clothes. l type and weight of the fabric. l size of the load. l room temperature around the dryer. l temperature of the wash rinse water. l amount of lint in the lint screen. 0 dryer temperature selection. See page 6 in your �Dryer for more informatron. Guide�
End-of-cycle
signal
The dryer sounds a signal to let you know when the cycle IS finished.The signal cannot be turned off and is not adjustable. The signal is helpful when you are drying permanent press, synthetics and other items that should be taken out as soon as the dryer stops.
Lint signal
Clean lint screen before each load. If you neglect to clean your lint screen, the signal will sound. The (whistle tone] signal lets you know the air flow is being restricted. Restricted air flow reduces drying efficiency. Turn off the dryer and clean the lint screen as shown on page 9.
