|
|
|
Who's Online
There currently are 5862 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
You can fully trust on this one!
All the schematics are very crear an in one piece per page
;
I have never bought a service manual which is as competely readable as this althogh it was a scanned pdf. Thank you for this succesful manual also cheaper than other sites.
;
Thanks for a very good and readable servicemanual. Just what I needed as a "dinosaur technician". I really recommmend this site and will come back.
Åsbjörn
;
The manual I purchased was just what I needed. I was glad to find a site where I can find so many manuals on a wide variety of products.
;
The best diagram that I used in a long time. Everything was right on te money. It was easy and fast. Iwoiuld but again when I need a service manual.
ELECTRICAL ADJUSTMENTS
2-20: SUB TINT CENTER 1. Receive the color bar pattern. (RF Input) 2. Using the remote control, set the brightness, contrast, color and tint to normal position. 3. Connect the oscilloscope to TP803. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (12) on the remote control to select "TNTC". 5. Press the RIGHT/LEFT button on the remote control until the waveform becomes as shown in Fig. 2-2. 6. Receive the color bar pattern. (Audio Video Input) 7. Press the INPUT SELECT button on the remote control to set to the AV mode. 8. Using the remote control, set the brightness, contrast, color and tint to normal position. 9. Activate the adjustment mode display of Fig. 1-1 and press the channel button (43) on the remote control to select "TNTCA". 10. Press the RIGHT/LEFT button on the remote control until the waveform becomes as shown in Fig. 2-2. 11. Press the TV/DVD button on the remote control to set to the DVD mode. 12. Activate the adjustment mode display of Fig. 1-1 and press the channel button (55) on the remote control to select "TNTCD". 13. Press the RIGHT/LEFT button on the remote control until the waveform becomes as shown in Fig. 2-3. 2-21: SUB COLOR CENTER 1. Receive the color bar pattern. (RF Input) 2. Using the remote control, set the brightness, contrast, color and tint to normal position. 3. Connect the oscilloscop to TP801. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (09) on the remote control to select "COLC". 5. Adjust the VOLTS RANGE VARIABLE knob of the oscilloscope until the range between white 100% and 0% is set to 4 scales on the screen of the oscilloscope. 6. Press the RIGHT/LEFT button on the remote control until the red color level is adjusted to 120 ± 5% of the white level. (Refer to Fig. 2-4) 7. Receive the color bar pattern. (Audio Video Input) 8. Press the INPUT SELECT button on the remote control to set to the AV mode. 9. Using the remote control, set the brightness, contrast, color and tint to normal position. 10. Activate the adjustment mode display of Fig. 1-1 and press the channel button (40) on the remote control to select "COLCA". 11. Adjust the VOLTS RANGE VARIABLE knob of the oscilloscope until the range between white 100% and 0% is set to 4 scales on the screen of the oscilloscope. 12. Press the RIGHT/LEFT button on the remote control until the red color level is adjusted to 120 ± 5% of the white level. (Refer to Fig. 2-4) 13. Press the TV/DVD button on the remote control to set to the DVD mode. 14. Activate the adjustment mode display of Fig. 1-1 and press the channel button (52) on the remote control to select "COLCD". 15. Press the RIGHT/LEFT button on the remote control to increase the step numbers by 3 steps to the AV. White 0% Fig. 2-2 0%
100% White 100% Red Level Fig. 2-3
Fig. 2-4
|
|
|
> |
|
