SHARP MDMR88H
Service Manual

MD-MT88H/99H

1 Inserting a MiniDisc
1 4 2 3

2 Connect the AC adaptor
AC 230-240V, 50/60 Hz (For U.K.)

1

Illustration: MD-MT88H

To the wall socket.
Illustration: MD-MT88H

Insert according to the direction arrow. AC 220-230V, 50/60 Hz (For Europe)

2
To the DC IN 5V socket. Insert securely, all the way in.

1 Slide the OPEN lever to release the compartment door.

3 Insert a MiniDisc as shown. 4 Close the compartment door.
When you record on a MiniDisc, check that the erase prevention tab is set to the �Recordable� position.

2 Lift it up.

1 Plug the AC adaptor into the 2 Insert the plug on the other
wall socket.

end into the DC IN 5V socket.

Recordable

Recording prevented

3 Connections

Preparation for use
The unit does not work if the unit is in the hold mode.

Press the HOLD button for 2 seconds or more. Hold
Illustration: MD-MT88H

Release

OPTICAL/ LINE IN

White: To Left Red: To Right

LINE OUT

To a stereo system with �LINE OUT� or �AUDIO OUT� sockets.
Note: If the audio system has only one pair of sockets they are usually for input only and recording via this connection is not possible.

Illustration: MD-MT88H

RIGHT

LEFT

CAUTION: It is not recommendable to put the MiniDisc into a rear pocket, as this may damage the product when sitting.

� 10 �