|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Even if the PDF is a scan, I can read the information I need.
The price is affordable and the service (mail sending) is very fast.
Thanks ! Regards. William (Fan of Kenwood)
;
Very good quality original datasheet!I like this amazing website!!!!!!
 ;
Excellent just what I needed to replace the electrolytic caps and make this old gem a beauty again. Was as scan of the original photocopied service manual.
;
It was helpful to get schematic with waveforms in important points and lot of service information. Manual is good quality, fast delivered. Of course it is hardcopy of paper one with all its disadvantages.
;
I want to give you a real heads-up for your desire to enable such people as I to acquire the information I need to maintain the older types of equipment such as this Akai HXA351W. You do a swell job with all the processes you have to perform so I can have a legible, thus usable
document which does not send me crazy trying to figure out the blurry text of a bad copy.
Very well done, Thomas.
MDX-G2-H/-L
ADJUSTMENTS
Tuner adjustment
No.
ITEM INPUT SETTINGS OUTPUT SETTINGS RECEIVER SETTINGS ALIGNMENT POINTS ALIGN FOR F I G .
FM SECTION :
SELECTOR : FM
(A) 98.0MHz MONO 1kHz, ±75kHz dev. 35.2dBf (ANT. input) Adjust VR1 and stop at the point where ED1(TUNED) goes on.
1
TUNING LEVEL
�
MONO 98.0MHz
X09 C/6 VR31
SYSTEM CONNECTIONS
X09(C/6, CN34)
FM-MPX-SG
Dummy antenna
FM-MPX-SG
POLAR SG
(A)
CD player check
No. ITEM INPUT SETTING OUTPUT SETTING PLAYER SETTING ALIGNMENT POINT ALIGN FOR FIG.
For this adjustment, enter the test mode. TEST MODE : While pressing the [CD PLAY/PAUSE] key, turn power on. Short circuit Set the sensor sec- *OPEN/CLOSE SW. tion of the optical Press the "PLAY" key power meter on the to check that the dispickup lens. play is "03". *CN26(1,2), X09 Connect the DC Press the "PLAY" key voltmeter to to check that the disCN25(#1 and #2) in play is "03" or "05" X09(B/6) On the power from 0.05 to 0.15mW. when the diffraction grating is correctly aligned with the RF level of 0.8Vp-p or more
1
LASER POWER
�
�
(a)
2
LASER CURRENT
Test disc Type 4
�
220mV to 550mV
Note: Type 4disc :SONY YEDS-18 Test Disc or equivalent. (KTD-02) LPF : Around 47k� + 390pF or so.
(a) Laser Power
0.05~0.15 mW
Pickup
Optical power meter
3
|
|
|
> |
|
|
Parse Time: 0.272 - Number of Queries: 136 - Query Time: 0.063
