Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Text excerpt from page 101 (click to view)
MEH-P5000R�,P5000,P5050
- Checking ATT setting value
RESULT2 "F" key in the main unit PET "
'
: ATT value checking menu
___ "'" key in the main unit ___ "'" key in the main unit ___ "'" key in the main unit ___ "'" key in the main unit ___ "'" key in the main unit ___ "'" key in the main unit ___ "'" key in the main unit ___ "'" key in the main unit __
: Setting value of E-ATT (Tracking) in pit part
" key in the main unit PFT
: Setting value of F-ATT (Tracking) in pit part
"
"
"
"
"
"
"
* Pressing RIGHT/LEFT key in each status where a setting value is displayed changes the value in the digit you selected in the range from 0H through FH.
'
'
"
' ' ' ' ' '
" key in the main unit GET " key in the main unit GFT " key in the main unit HAT " key in the main unit HBT " key in the main unit LAT " key in the main unit LBT " key in the main unit GCT
: Setting value of E-ATT (Tracking) in grove part
: Setting value of F-ATT (Tracking) in grove part
: Setting value of high reflection A-ATT (Focus)
: Setting value of high reflection B-ATT (Focus)
: Setting value of low reflection A-ATT (Focus)
: Setting value of low reflection B-ATT (Focus)
: Setting value of TCRS-ATT
* Pressing "SCR" key in the main unit in each status switches to "TEST STOP" . * Pressing "F" key in the main unit in each status where a setting value is displayed changes the digit of the setting value that will be changed. � When the setting value has three digits. The first digit (Initial value)
*** ___
