perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 9 (click to view)
6. Touch START.
The COOK1 Signal Light will stay on to show that the oven is cooking. The Cook Power Signal Light will go off. The oven will cook in the Cook Power you selected.
count down
The Display counts down the time to show how much cooking time is left. The Cook Power can be checked by touching the COOK POWER Pad. The COOK POWER Signal Light will come on and the Display will show the Cook Power you selected. Touch STARTto return the Display to the countdown. When the cooking time ends, you will hear 3 beeps. When the beeping stops, the Display will show the time of day.
Changing
l
cook
powers
Cook Power can be changed at any time during the cooking cycle. -Touch COOK POWER. -Touch a number for the new Cook Power. -Touch START.The oven will continue to cook at the new Cook Power. OR... -Touch COCK POWER. -Touch CHANGE/CANCEL Pad once, then touch START if you wont to change lower Cook Power to HIGH.
a
Cooking in two cycles
For best results, some recipes call for one Cook Power for a certain length of time, and another Cook Power for different length of time. Your microwave oven can be set to change from one to another automatically.
DO THIS... 1. Put
food in the oven and close the door.
THIS HAPPENS...
m .
2. Touch COOK 1 & 2 once.
The COOK1 Signal Light will come on and the Display will show a colon.
