Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Great to be able to set channels again, on an old but stoll fine working TV
Text excerpt from page 49 (click to view)
2. Remove the bulb cover mounting screws. 3. We recommend replacing bulb(s) with candelabra-base 30-watt bulb(s) available from your authorized Whirlpool service company (Part No. 4158432). 4. Turn the power back on at the main power supply.
4. Remove bulb holder mounting screw.
The oven
light
1. Turn off power at the main power supply.
5. Llft up the bulb holder. 6. We recommend replacing the bulb with a candelabra-base 30-watt bulb available from your authorized Whirlpool service company (Part No. 4158432). 7. Replace the bulb holder and mounting screw.
2. Remove the vent cover mounting screws. 3. Tip the cover forward, then lift out to remove.
8. Slide the top of the vent cover into place. Push the bottom until it snaps into place. Replace the mounting screws. Turn the
power back on at the main power supply.
