First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
Excellent manual, very clear, technical specification provided, useful information regarding adjustment and set up.
Text excerpt from page 29 (click to view)
DISASSEMBLY INSTRUCTIONS
3-11: FEED MOTOR (Refer to Fig. 3-11-A) 1. Remove the 2 screws 1. 2. Remove the Feed Motor. 3. Remove the Motor Gear.
11
Main Chassis Ass'y Motor Gear Feed Motor � Screw Torque: 1 ± 0.5kgf�cm
Fig. 3-11-A
NOTE 1. In case of the Motor Gear installation, check if the value of the Fig. 3-11-B is correct. 2. When installing the Feed Motor, check if the cable is positioned as Fig. 3-11-C.
