Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 8 (click to view)
SWITCHING ON/OFF
Switching on/off
There are various ways of switching the unit on/off: Switching on/off using the vehicle ignition If the unit is correctly connected to the vehicle�s ignition and it was not switched off using button 3, it will switch on/off simultaneously with the ignition. You can switch the unit on even if the ignition is off: � To do so, press button 3. Note: � To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off. Switching on/off using the removable control panel Switching on by inserting a CD If the unit is switched off and there is no CD inserted in the drive,
� press the
button 9.
The flip-release panel opens. � Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. The CD will be drawn automatically into the drive. You must not hinder or assist the drive as it draws in the CD.
� Gently close the control panel
whilst exerting a little pressure until you feel it click into place. The unit switches on. CD playback begins.
� Remove the control panel.
The unit switches off.
� Attach the control panel again.
The unit switches on. The last settings (radio, CD, CD changer or AUX) will be reactivated. Switching on/off using button 3
� To switch the unit on, press button
3.
� To switch the unit off, press button
3 for longer than two seconds. The unit switches off.
