WHIRLPOOL NT19HX3GL
Owner's Manual

that you cover open food containers. Dishes or trays containing leftovers should also be covered to seal in flavors. Storing foods in plastic bags or in their original air tight store wrappings reduces the evaporation of toolsture from them and lengthens storage time. SHELVES ADJUSTABLE CANTILEVER SHELVES can be moved up or down to suit your individual needs. To remove a shelf, lift the front of the shelf straight up, rock slightly and pull straight out. To lock in another position, tilt shelf with the front up. Insert hooks into the desired frame openings and let the shelf settie into place. Make sure it is securely locked at the rear.

in your kitchen.

The plastic crisper cover

OUTSIDE Wash regularly with mild soap and water. Rinse with clear water. Never use abrasive scouring powders, automobile polish or furniture polish. Glass Wax or a similar product will clean and protect the finish satisfactorily. DOOR GASKETS Your door gaskets are vinyl. They may be cleaned with a baking soda solution, soap and water or with a mild scouring powder. DEFROST PAN Defrost water drains into a shallow pan beneath the cabinet and evaporates. During periods of high humidity, water could cleaned once a month with a solution strong soap and water. of

also serves as a refrigerator storage shelf. To remove the cover, lift the front edge and pull straight out. To replace the cover, set rear bars on supports and push back until front can be lowered into place, If a restricted door opening does not permit removal of a drawer, tilt crispers and shelf assembly up and remove by lifting straight out. Keep your crispers tightly closed to insure crispness and freshness. Storing leafy vegetables, such as celery and lettuce in plastic bags reduces the evaporation of moisture from them. Leveling Crisper Shelf

support leg as shown, \\ _\ %'x_'__ ,\ _,.--_;_ _ i

C"!_ER remain in the pan. This pan should be !ii ! Jl [ //_ _ _ .,_f7/_.4'_
i

If the crisper shelf is not level, adjust the _,__ ICE CUBE
RAISE _

(1)THE FREEZERSHELF can be removed by lifting the fast-freeze compartment straight up until the left end bars of the freezer shelf are out of the sockets in the side wall of the fast -freeze compartment. (2) Lift the freezer shelf slightly and (3) pull to the left until right end bars are out of the sockets in the right freezer wall. Reverse the removal procedure to replace the freezer shelf, li

SERVICE

To remove ice cubes from the tray, turn it upside down and place it on top of the storage pan. Depress the center of the flexible tray with your finger and the ice cubes will fall into the pan. You can also twist the ends cubes,

To remove the defrost pan, grasp the base grille at both ends and pull it straight out. cabinet.

The top of the fast-freeze compartment can be removed and put in a lower position on the side wall. The freezer shelf can also be lowered into another position. FAST-FREEZE COMPARTMENT

This model refrigerator is designed so an Automatic Ice Maker can be easily installed whenever you want it. Order the ice maker of the ice cube trays for easy removal of ice kit number shown on the label on the cabinet back. The kit contains installation instructions, water connection instructions and other information maker operation, MAGNETIC DOOR concerning the ice GASKETS

NiPO
\ Slide the pan out from g XKunderneath the To replace the defrost pan, position the side flanges to fit over slide rails and push it in until it stops. To replace base grille, align spring clips with squareopening in cabinet and tap each end until grille locks in place.

I1 IJ

DEFROST PAN _

THE FAST-FREEZE COMPARTMENT can be used for fast freezing of ice cubes and fast chilling of foods and beverages.

Door gaskets are magnetized to insure an air tight seal all around. These gaskets cling to the cabinet front, once the doorsare closed to within their magnetic range.

'
R

CLEANING
,

CO.DENSER
Your refrigerator will operate more efficiently when the condenser is clean. It can be adequately cleaned throughathe right should be cleaned at least twice year. It front of the base opening. Grasp the base grille at both ends and pull straightout. Then reach through the base opening with your vacuum cleaner attachment to clean the front and open end of the condenser. r_ _ Ir r

fFREEZER SHELF
FAST-FREEZE

.

I[I 1 _,[ COMRA*\,ENr

MEAT

KEEPER

A sliding drawer is provided for short term storage of fresh meats. This meat keeper is suspended from one of the refrigerator compartment shelves. It slides out to the front so you can YOUR MEAT items stored within. KEEP easily reach all KEEPER TIGHTLY CLOSED AT ALL TIMES. To remove the meat pan, pull it out until it stops. Then apply a little more pres-

DISCONNECT THE POWER CORD BEFORE CLEANING Your refrigerator can be easily rolled out for cleaning. Simply turn the leveler feet COUNTERCLOCKWISE until they turn free. Then pull the cabinet straight out. If you have installed an automatic ice maker, we recommend that you turn the water supply off before moving the cabinet, After cleaning behind your model, push it back and turn the levelers CLOCKWISE to lock cabinet in place. INSIDE Clean both compartments and inner door an abrasive powder, solvent, polish cleaner

FRUIT sure and_pull completely out. VEGETABLE CRISPERS The fruit and vegetable crispers slide out for easy access to foods stored within, They are completely removable for cleaning (hand wash only) or for use elsewhere

or undiluted notice a and discoloration appanels with mild soapslightwater. Do not use You may detergent. pearing at the top and near the center of the back wall of the fresh food compartment. This is no cause for alarm, but it should be cleaned off periodically,

__0,

_"_B=SE ,, EN/' G CL_OE,SE °R

To replace base grille, align spring clips with square opening in cabinet and tap each end until grille locks in place.