Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
Text excerpt from page 55 (click to view)
Messages
Message ALL SKIP TR ALREADY FINAL Signification Skip marks are recorded to all the tracks. You are trying to erase a track or add a skip mark on a finalized disc. Loaded disc is blank. Loaded disc is damaged. Erasure on this disc is impossible. Loaded disc is damaged. Finalization on this disc is impossible. Replace the disc. Replace the disc. Solution Replace the disc.
ALREADY UNFIN. You are trying to unfinalize an unfinalized disc. BLANK DISC CANNOT ERASE CANNOT FIN. CANNOT LISTEN
You are trying to adjust the volume during high-speed recording. During high-speed recording, no sound can be heard; therefore you cannot adjust the volume. Disc is damaged. Recording on this disc is impossible. Loaded disc is damaged. Unfinalization on this disc is impossible. Loaded CD-R is damaged. You are trying to unfinalize a CD-RW which has been recorded using the �Disc At Once� recording system. You are trying to record on a fully recorded CD-R or CD-RW. Incoming digital signal is not of an audio format. Replace the disc. Replace the disc. Replace the disc. Replace the disc. Replace the disc. Check the source played on the external component connected to the LINE DIGITAL IN terminal. You can only use the REC MUTE button during Standard Recording. Replace the disc. Load a CD-RW. Load a CD-R or CD-RW. Replace the disc. Replace the disc. Replace the disc. See �SCMS� on page 51.
CANNOT REC CANNOT UNFIN. CDR DISC NG DAO DISC DISC FULL NOT AUDIO IN
NOT REC MUTE
You are trying to use the REC MUTE button during Synchronized Recording. Loaded disc is not an audio disc. You are trying to perform one of the functions which is only possible on a CD-RW. You are trying to perform one of the functions which is only possible on a CD-R or CD-RW. OPC cannot be performed. No recording or erasure can be performed on this disc. PCA is full. No recording or erasure can be performed on this disc. PMA is full. No recording or erasure can be performed on this disc. Digital recording is prohibited in accordance with SCMS regulations. The remaining time on a disc is shorter than the playing time of the track you are trying to record. 21 skip marks are already recorded. 99 tracks have been recorded. No further recording is possible. The external digital component is not connected properly or is turned off, or its signals are incompatible. OPC is being performed before recording, if a disc is just inserted in CD Recorder.
NO AUDIO DISC NO RW DISC NO R/RW DISC OPC ERROR OPC FULL PMA FULL SCMS PROTECT SHORT REMAIN SKIP FULL TNO FULL UNLOCK UPDATE OPC
Check the connection, or playback source. This is normal. After OPC is correctly done, recording starts.
