I PURHASED THIS PRODUCT BECAUSE I WAS HAVING PROBLEMS WITH MY CDR20 HARMAN KARDON RECORDER. WHICH I PURCHASED NEW 12 YEARS AGO. AFTER REVIEWING THE MANUAL, I WAS ABLE TO ADJUST THE TENSIONER IN THE SYSTEM. WORKS LIKE A CHAMP!.
SAVED ME AT LEAST 100.00 WHICH WAS WHAT A SERVICE REPAIR STATION WANTED. GREAT MANUAL EASY TO READ. SPECIALLY AFTER I PRINTED THE PAGES WHICH DEALT WITH MY RECORDER. THANKS A LOT!!!!!!!!
I have never bought a service manual which is as competely readable as this althogh it was a scanned pdf. Thank you for this succesful manual also cheaper than other sites.
Thanks for a very good and readable servicemanual. Just what I needed as a "dinosaur technician". I really recommmend this site and will come back.
Åsbjörn
Text excerpt from page 129 (click to view)
4.18 Cleaning the Unit
Use a mild cleaning solution on a lint-free cloth to wipe the machine�s cover, handset and paper cassette tray. Never spray cleaner directly onto the fax machine as the spray could damage components inside the fax.
Cleaning the Document Feeder Area
If the unit is not feeding documents properly, perform this procedure: 1. Turn off your fax machine. 2. Get a soft, lint-free cloth. 3. Moisten the cloths as follows: One of the two cloths with isopropyl alcohol The other cloth with a cleaner suitable for use on platen/rubber rollers. 4. Open the scanner cover by holding the scanner cover release. 5. Use the moistened cloth (see step 2 and step3) to clean the face of rollers. Rotate the rollers by hand to allow cleaning of the entire roller surface.
Cleaning the Inside of Contact Glass
If you find your fax recipients complaining that the faxes you send are streaked, the inside of contact glass surface may be dirty. 1. Turn off your fax machine. 2. Get a soft, lint-free cloth. 3. Open the scanner cover by holding the scanner cover release. 4. Remove the contact glass as shown. 5. Use the cloth with isopropyl alcohol to clean the contact glass. Note: Do not touch the contact glass directly by hand. Please put on your gloves. Do not use abrasive materials on the contact glass.
