This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Text excerpt from page 6 (click to view)
Settings
�
1 2 3 4
Sorting Program Positions
Select the channel position which is to be moved with the p or P button. Press the h and then the G button. � The »Channel Display« will appear. Enter the new channel position with the digit buttons 0 and 9 using two digits and confirm with the G button. End the setting with the h button.
�
Limiting the Channel Position Selection
The ATS search stores all television channels found and automatically �blocks� the first non-assigned channel position. This means only the found television channels can be selected when you switch through the channel positions stey by step with the p or P buttons. You can also enter this limit manually. Channel position 6 onwards has been �blocked� in the example.
¬
1 2 3
Press the h and then the G button. � The »Channel Display« will appear. Select channel position 6 with the p or P button. Press the E button once (position Limit« (----) with the p or P button.
--- s -------- s -------------- s -------- s -------------------- s -----0-9 4 TXT OK i
Store the setting with the G button and end with the h button. � Now only the first 5 channel positions (and AV) can be switched through in quick sequence with the p or P button. � All channel positions � including the �blocked� ones � can still be selected with the digit buttons 0 � 9.
