This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Text excerpt from page 14 (click to view)
ASSEMBLY
Adjusting the harness Check before starting
You should always use the harness with the machine to give maximum control over the machine and reduce the risk of fatigue in your arms and back. � � � Put on the harness. Hook the machine onto the harness support hook. Adjust the length of the harness so that the support hook is roughly level with your right hip.
� � � �
Inspect the working area. Remove any objects that could be thrown out. Check the cutting attachment. Never use blunt, cracked or damaged equipment. Check that the machine is in perfect working order. Check that all nuts and screws are tight. Make sure the chain is adequately lubricated. See instructions under the heading Lubricating the cutting attachment. Check that the cutting attachment always stops when the engine is idling. Only use the machine for the purpose it was intended for. Make sure the handle and safety features are in order. Never use a machine that has any parts missing or has been modi�ed in relation to the speci�cation.
� � �
Filling with oil
� Open the cap on top of the bar head
� �
Fill with Husqvarna saw chain oil. Re�t the cap.
