HARMAN PANTHEON
User Guide

Macintosh® Operation
SELECTING A PRESET
Pantheon comes complete with 35 factory presets to choose from. These presets are designed for a variety of reverb applications such as spatialenhancing halls, vocal plates, or for adding just a touch of ambience to your project. To select presets, do the following:
1. Click the up and down arrows to the to the right of the PRESET field at the bottom of the Pantheon window. The presets will become active as each is selected.

Lexicon Professional®
them difficult to locate. Click the New Folder icon at the bottom. In the window that appears, name the folder Pantheon Presets. This will be the folder you should save all your reverb presets to. Click the Create button. This will open the Pantheon Presets folder and return you to the save dialog window. In the Save As field, type in the name of the preset. Click the Save button to save the preset.

3.

4. 5.

EDITING A PRESET
Once a preset is selected, use Pantheon�s sliders and knobs to adjust the individual parameters to the desired settings. If Pantheon is inserted inline with a track, set the reverb Level slider to 0dB and control the ratio of reverb to dry signal using the reverb Mix slider. If Pantheon is inserted in an auxiliary bus, set the reverb Mix slider to 100% and the reverb Level slider to 0dB. Control the ratio of reverb to dry signal using the auxiliary send and return controls in your recording application.

This new preset list will be added to the list of factory presets that were included with Pantheon.

LOADING A PRESET
Once you have saved custom reverb presets to your hard drive, you can now load these presets into Pantheon as needed. To load a preset, do the following:
1. 2. Click the L icon at the bottom of the Pantheon window. If the Pantheon Presets folder is not the current folder selected, locate this folder first. Select the preset you want to load and click the Open button.

3.

SAVING A PRESET

Once a preset has been edited to your liking, you can now save these changes as a user preset. To save a preset, do the following:
1. Click the S icon at the bottom of the Pantheon window. A Save dialog box will appear. 2. The first time you save a preset, it is recommended you create a single new folder to keep your user presets in. This way presets are not scattered throughout your hard drive making

This will load the saved preset into Pantheon. The name will not be displayed in the PRESET field but both the slider and the knob positions as well as the display information will update to the saved preset�s settings.

BYPASSING PANTHEON
To hear your track with or without reverb, click the B icon at the bottom of the Pantheon window to engage or disengage the reverb during playback.

7