perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 70 (click to view)
Installing a Memory Module
Your notebook comes with 16 MB of memory pre-installed. If you want to expand the memory size, you can install any of the following modules; 8 MB (CE-A311B), 16 MB (CE-A312B), or 32 MB (CE-A323B). A memory module can be installed in the memory compartment in the base of the notebook. You can install the memory module quite easily. Follow the steps below to install a memory module. Please refer also to the Installation Safety Precautions at the beginning of this chapter. 1. 2. 3. 4. Turn off the notebook and disconnect the AC adapter. Turn the notebook over and place it on a flat surface. Locate the memory compartment. Remove the cover of the compartment by carefully levering the cover upwards. There are two vertical connectors inside the memory compartment and two connectors on the base of the memory module. You will notice that one corner of the module connectors is beveled. When you turn the module over to install it, the beveled corner of the connector is nearest to the back side of the notebook.
Memory Module Connectors
5.
6.
Align the memory module properly according to step 4 and carefully install the memory module into the compartment. Press the module down quite firmly to ensure that it is seated correctly in the compartment. Replace the compartment cover and restart your notebook. The notebook automatically registers and uses the new memory.
