|
|
|
Who's Online
There currently are 5884 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
very good manual with clear electrical schemes. Very helpful to find wat was wrong inside my microwave.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
;
This was super service.Ordered this manual and was reading the download an hour later
;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
;
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
64
VAIO® Z505 SuperSlim Pro Notebook User Guide
When I turn on my computer, the message �Operating system not found� appears and Windows does not start u Check the floppy disk drive to see if a non-bootable diskette is in the
drive.
u
If a non-bootable diskette is in the drive, turn off the computer, remove the diskette, and then turn on the computer again. Confirm that Windows starts properly. If Windows still does not start, follow the procedure below to initialize the BIOS. If the floppy disk drive is empty or contains a bootable diskette, use the following procedure to initialize the BIOS:
u
1 Remove the floppy disk drive, port replicator, PC card, and any other
peripheral devices from the computer.
2 Turn the computer off and then turn it on again. 3 Turn on the computer and press the F2 key when the Sony logo appears.
The BIOS setup menu screen appears.
4 Press the arrow keys to select the Exit menu. 5 Press the arrow keys to select Get Default Values and then press the Enter
key. The message �Load default configuration now?� appears.
6 Check that Yes is selected, then press the Enter key. 7 Press the arrow keys to select Exit (Save Changes) and then press the Enter
key. The message �Save configuration changes and exit now?� appears.
8 Check that Yes is selected, then press the Enter key. The computer restarts.
When I turn on my computer, the message �C:\WINDOWS� appears and Windows does not start u Enter �win,� then press the Enter key. When the message �MS-DOS is
activated. Do you want to return to Windows and restart applications?� appears, press the Enter key again. Windows starts.
u
When shutting down your computer, follow the procedure in �Shutting Down Your Computer� on page 13. Windows should start automatically the next time you turn on your computer.
|
|
|
> |
|
