|
|
|
Who's Online
There currently are 6015 guests and
24 members online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
1
2
3
4
Flowchart of Failure Analysis for The Video-system Assy
A
DTV doesn't work
DTV
Digital broadcasting is not received. YES
< PDP-427XDA : Only >
Is any function which inputs signal selected with the input selector? YES Has the symptom settled when the Digital RF IN terminal and input cable are checked ? NO
NO
Select a designated input with the input selector.
YES
Poor contact of the terminal part or input cable is defective.
Is the power-supply voltage of CN4017 normal? YES
NO
Check between CN4017 and P3,P8 (Power Supply).
B
Is RESET_DT(IC8401 159pin) High? YES Do you communicate by TXD_DT(IC8401:103) and RXD DT(IC8401:102)? YES Is a signal output from CN4013? YES Is the signal input from CN4013 to IC8001? YES Has the symptom settled when the DTB Assy is replaced? NO Has the symptom been settled when the MAIN Ass'y is replaced? YES YES The DTB Assy is defective. Replace the DTB Assy. NO Check between CN4013 and IC8001. NO Check between IC8401(102,103) and CN4014. NG Replace Main Ass'y NO Check between IC8401(159pin) and CN4014.
NG
Replace DTV Ass'y
C
NO
The panel is defective.
Finishing troubleshooting
D
E
F
PDP-427XG
1 2 3 4
21
|
|
|
> |
|
