Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
Text excerpt from page 105 (click to view)
5
6
7
8
2 ANALOG, DIGITAL and EMI FILTER
7 8 9 10
Remove the six screws (M3 x 8). Remove the eight screws (M4 x 8). Remove the connector (right � center � left). Remove the ANALOG DIGITAL EMI FILTER.
A
7 9 7
7
9
7 9 7
B
7
8
8
8
8
13 14
Remove the Assy Brkt V-supporter L and R. SMPS
13 14
C
11 12 13 14
Remove the four screws (M3 x 8) to release the ASSY BRKT MAIN. Remove the four screws (M5 x 12). Remove the eight screws (T4 x 16). Remove the five screws (M3 x 8) to release the SMPS.
