|
|
|
Who's Online
There currently are 5858 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
5
6
7
8
7.1.9 DISASSEMBLY
1 Rear Case (43P) and Front Case Assy (43P)
1 2
Remove the ten screws. Remove the 25 screws. �1: When reassembling, first secure the screws for these holes to position the Rear Case (43P) correctly. Rear Case (43P)
A
1 (Secure this screw first.) 2 12 2 2 1
3 4
Remove the Rear Case (43P). Remove the screw.
2 1
2
21
2 1 2 2 1 2 2 21 4 2 2 2 2 2 2
�1 �1
2 2 2 1 12 2 2 1 2
B
When reassembling the Front Case Assy (43P) Secure the screws in the order of ~ and Ÿ. Then secure the screws on the upper side, the sides, then the lower side.
3
C
5 6
Remove the flexible cable on the PANEL KEY Assy. Remove the Front Case Assy (43P).
6 -2
Note: If you wish to remove only the Front Case Assy, you can remove it in the order of 1, 4, 5, and 6.
D
6 -1
Front Case Assy (43P)
E
5
PANEL KEY Assy
F
PDP-435PE
5 6 7 8
71
|
|
|
> |
|
