Fast Download,all pages present,an excellent copy.THis enabled to find the origional part numbers and chase them up. The cartridge is proving difficult to find but at least I know the origional part number.Thanks to all.
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
Text excerpt from page 89 (click to view)
PDP-505HD
2. VIDEO ASSY
Note) Shield Case of Video Assy should not touch the heat sink at the primary side of Main Power Assy in standing Video Assy. (Noise may be generated and that may break the Main Power Assy)
4
Release Video Assy from PCB Hinge
1
Remove a screw
1
Remove a screw
3 3
Remove the harness from Wire Saddle VIDEO ASSY Remove the harness from Wire Saddle
2
Remove all screws and nuts from Terminal Panel
VIDEO ASSY
5
After pulling VIDEO Assy backward to release it from Terminal Panel, insert it to the PCB Hinge again.
